





High density polyethylene – Simple and fast – Lightweight and robust security – Offers unlimited configurations and applications – Anti skid surface
WARRANTY
“T Dock” is committed developing High Density Polyethylene products of superior design, performance and value. We pride ourselves on developing an ongoing, lifelong relationship with you, our consumer and T-Dock association. Due to our extreme confidence in our products and our insatiable desire to deliver only the highest level of service.
“T Dock” is committed to delivering high quality products, and we stand behind this commitment with our 5 year Warranty. Made out of high density polyethylene, our floating docks has been tested under high pressures and temperatures to ensure reliability and environmental climatic hazards that may occur over time.
Lower Cubes
Designed for watercraft like row boats and canoes. Over the years, the low dock have been used in several international competitive rowing events. Order your low dock today or just add the lower cubes to your original T Dock installation for an easier access side as demonstrated on the illustration figure. Perfect for an easier access to water in general, as well as for smaller children and schooling purposes.
About
A Drive On allows you to store your boat, rib or aqua scooter clear and dry out of the water. This allows your asset to remain free from weed growth, barnacles and other organisms. This eliminates the need to ‘antifoul’, which reduces your future costs and helps protect the environment. Like all our cubes, our drive on cubes are durable and is maintenance free. The inside of our drive on cubes are filled with eco friendly foam to solidify the structure.
Drive on Roller
Depending on your boat, to ease your drive on experience, we may suggest this new type of drive on. Therefore it is perfectly suitable to your normal boat, rib or aqua scooter. Just like all our cubes, our drive on cubes are durable and is maintenance free. The inside of our drive on cubes are filled with eco friendly foam to solidify it’s structure. This will make our product durable for a lifetime. Our products are made of recycled materials which are to food grade standards ensuring that they will not damage the environment and are always safe to use.
About Pin
Each group of 4 cubes creates a very strong composition in the center of the assembly. Which allows the pin to go through and lock the cubes within its structure. Made out of High Density Polyethylene, they are robust and secure. Using a ‘T’-bar tool, the pin is screwed in to the nut. Since the pin is fixed to each corner tab of each cube, it tightly holds the structure together. When fixed in position the top surface of the pin becomes part of the dock and is textured with an Anti skid surface.
( H x L x W ) 36 x 24 x 17.2 cm / 14“ x 9.6“ x 6.8“ Resistant to temperatures from -85°C to +90°C Weight 0.380 kg / 0.84 lbs High density polyethylene Anti skid surface
About Anchoring
To anchor your dock, simply attach it to any installation of your choice to the anchoring pin that will be situated at the bottom of the dock after installation. Custom anchoring is available, please fill out the quote request for detailed anchoring solutions. This would definitely keep your dock steady near the shore or in the middle of the lake. It is suggested to use a minimum of two anchoring pins per dock depending on it’s size. For a very large dock or with a more complex structure, it may be needed to use a custom anchoring. Our customer care representative will take care of your project and will suggest you suitable solutions.
About
The “Lug connector” is used to join cubes together around the perimeter of the dock or inside the perimeter of your “Drive on” structure. As it is the external connecting pin, it is more convenient to use a lug connector than the conventional pin that we use within the structure. It is robust and requires a Hex tool to properly create a strong fix of the corner tabs of dock. In some cases a “spacer” might be needed. Same as all our products, our lug connectors are made of an injection process which assures the same strength and safety.
About
The sliding nut fits to the corner tab “number one” as it is the lowest corner tab of the cube. This will allow an easy way to screw in the pin without holding the bottom nut. Sides of the dock, should be attached by a normal nut and a “lug connector” to replace the pin. Made out of High density polyethylene, our sliding nuts gives a strong and durable joint and increases the performance of the structure. All our accessory are made of the same material as the base cubes, therefore they give same levels of strength and environmental care.
About
This nut is used with the “lug connector” to fit on the corner tabs of the dock’s perimeter or within a “drive on” structure. We always use eco friendly high density materials, our products are tested in a laboratory for various circumstitions that may occur over time. Tested and approved for heavy duty purposes, all our product’s durability is guaranteed for life. Our customer care representatives will make sure that your shipping contains all materials and tools to set up your new T Dock installation.