Connecting Pin

Connecting Pin


About Pin

Each group of 4 cubes creates a very strong composition in the center of the assembly. Which allows the pin to go through and lock the cubes within its structure. Made out of High Density Polyethylene, they are robust and secure. Using a ‘T’-bar tool, the pin is screwed in to the nut. Since the pin is fixed to each corner tab of each cube, it tightly holds the structure together. When fixed in position the top surface of the pin becomes part of the dock and is textured with an Anti skid surface.

  • Height (full height) 22cm (8.67″)
  • Diameter 13,5cm / 5.31″ (inner) 17.2cm / 6.77″
  • Cavities 4: for better hold and better through flow
  • Resistant to temperatures from -85°C to +90°C
  • Weight  0.380 kg  / 0.84 lbs
  • Made from HDPE (High Density Polyethylene)
  • Anti skid surface
  • Honeycomb structure for better thread

Anchoring Pin


About Anchoring

To anchor your dock, simply attach it to any installation of your choice to the anchoring pin that will be situated at the bottom of the dock after installation. Custom anchoring is available, please fill out the quote request for detailed anchoring solutions.  This would definitely keep your dock steady near the shore or in the middle of the lake. It is suggested to use a minimum of two anchoring pins per dock depending on it’s size. For a very large dock or with a more complex structure, it may be needed to use a custom anchoring. Our customer care representative will take care of your project and will suggest you suitable solutions.

T Bar Tool